How To: Edit/Add To Your Signature

[tenXmom]

How to add clickable image to your sigline

[sdElise]

OK-I have read thru the thread and watched the vid. I know where to go to change my siggy line, but I don't have the editting box. Mine is blank. There is not clickable link box. Thoughts?

[tenXmom]

pqelise -

In your control panel, under *edit options, FAR down in the right column.... You should see Misc Options where you can change the drop down to Enhanced Interface for your editor of choice

I "think" that will give you the editable options

[johnben1444]

I have been wanting to ask this question. Thanks for the briefing.

[GloriousDay]

Wow, I'm learning a lot here! Thanks for sharing!

[chris d]

Wish I found this earlier. Been looking for the past few minutes on creating/editing a sig file. Cheers All!

[IKILL8]

once you get 30 posts does your signature show up on all of your previous posts?

[IKILL8]

Thanks for the help!

[sc8074]

just go the user cp option AND WRITE your signature

[safehold]

Originally Posted by *Bama*

****Attention New Members: You must have over 30 posts and be a "member" to add a signature****

I have seen alot of questions about this so thought I would make a post for those who are still unsure how to edit or add things to their signatures.

First you need to click on User CP
Then Edit Signature

In the first block, you can add your info, name, blogs, business links etc. You don't have to code them like you did on the old boards, you just highlight and then use the icons , B, I, U etc.

If you want to add a banner or button to your signature, then you have to scroll down to where it says Signature Picture

There are 2 options, one is to add the direct link if you have it hosted somewhere or you can upload it from your hard drive.

Once you have it uploaded or linked, then you need to click on "Insert Picture Link" this is in PINK. Then you can select Preview to make sure it's there and then Save Signature.

See the attachment below for more help to see what it looks like!

Then when you go to the board, it should be there! Hope this helps those that are confused.

Glad you made this clear , I was just asking myself this question. Tnx,
Terry